As unpleasant as the subject might be, we can’t avoid talking about noisy sandals. You will look great with the brand new pair of sandals. However, when you take a step outside, you might start noticing funny and irritating suction noises. It’s quite difficult to ignore such.
Suction noise from your sandals attracts unnecessary attention to make you feel uncomfortable throughout your journey. Luckily, you can get rid of the suction noise made by your sandals. Nobody would like to be associated with embarrassing sounds coming from the legs.
Lubricating the insoles is an effective way to overcome the problem of your sandals creating suction noise. Typically, the noise is caused by fast air escaping through the tiny holes. Suction noise can also be stopped using petroleum jelly or talcum powder.
Table of Contents
How to Stop Sandals From Making Suction Noise
-
Use of Talcum Powder
Talcum or baby powder absorbs moisture. Absorption property makes talcum powder a good choice if you want to stop the squeaky noise from your sandals.
The next time you plan to wear your sandals, sprinkle a little talcum powder or baby powder at the sole before sliding the foot in. As a result, your feet might turn white after a while, but doing so will stop the sweat from building up and cause the production of suction sound.
The use of baby powder to stop suction noise is the best option for sandals made of PVC or rubber, which don’t get wet like sandals with leather soles.
-
Use of Petroleum Jelly
Petroleum jelly is a good lubricant for many things, including squeaky sandals. Many times, the sound of your foot rubbing against the sandal can make your shoes make noise. Spread some petroleum jelly on the areas that need fixation, to stop the suction noise.
If you use too much, you’ll have sticky feet. A pea-sized amount should be enough. You’ll have to apply it often, but not too much as in the case of baby powder. Even if your sandal is made of leather or another natural material, the jelly will get inside and help keep it well-oiled to prevent the noise.
-
Poke Holes in the Insole
Air is likely to be leaking out of the sole unit of your sandals if they aren’t old enough to wear yet. Use a pin to make small holes in the insole of your sandals. That will make it easier for the air to get out and drastically reduce the squeaking noise.
The heel and area under your toes are the main parts to prick some tiny holes. It will likely be from here that the air comes out.
-
Use of Waterproofing Spray
Use of the waterproof spray helps protect the uppers of shoes made of leather, suede, or canvas from being damaged. It also helps keep them fresh for longer.
It’s a brilliant idea to spray the inside of your sandals with a waterproof substance. It will stop sweat from getting into the insole to make your sandals squeak.
In addition, it stops sandals from getting marks easily when you often wear them barefoot. You need to keep your sandals looking good as long as you can, even if it’s not essential to you.
One time a month, or less often if you only wear it once in a while; Spray waterproof inside the sandals and let them dry for about 20 minutes or so before you wear them. Hopefully, this will stop the squeaking noises that come from sweaty feet.
Why Do Sandals Make Suction Noise?
Sandals differ from closed shoes starting with the initial aspect of construction. However, for manufacturing a single unit, both closed shoes and sandals frequently use the same procedure. Soles are usually two or three parts, the insole, midsole, and outsole.
Keep in mind that not every shoe has a midsole. If it happens, it’s where the advanced technology brings the excellence of cushioning and air circulation.
The insole of a shoe may provide some cushioning, but it’s mostly merely a protective layer separating your foot and the entire sole unit. The primary function is to absorb sweat and enhance comfort and durability.
Almost all sandals manufacturers most often follow the technique of including a sole, midsole, and outsole. Even flip-flops and sliders fall under this category. However, their sole units are thinner, produced from less expensive materials. However, numerous layers of foam may still be visible on the sliders.
Sandals’ suction noise is mainly created by the tight contact between your foot and insole. However, there are a number of direct causes for the noise. These are:
Age of the Sandal
Because air escapes from the layers of the sole unit, new sandals tend to have louder suction noise. The probability of new sandals making high suction noise is prevalent if the cushioning is foam; foam is compressed underneath when you walk on it.
Instead of rebounding back into position, the foam remains compressed over time. That is why the suction noise usually goes away as you wear the shoes.
On the other hand, Suction sounds might develop as the sandals get old. It may be due to normal wear and tear.
If your sandals have a suede insole that is popular on higher-end models, the moisture from your foot essentially transforms it into regular leather with time.
Over time, the smoother surface is unable to absorb perspiration moisture effectively. As your foot lifts from the sandal’s bottom, you may hear more suction noises.
Sweaty Foot
Most of the time, sandals make suction noises because sweaty feet stick to the bottom of the shoes. Most people don’t wear sandals with socks on.
Socks are good at soaking up the sweat from your feet. They can also be used for many other protective purposes. If you don’t have a pair of socks, the sweat will get out to your sandals making your foot and insole slide against each other.
Damaged Sandal
Another reason your sandals make suction noise is that they might be damaged. When buying, both old and new sandals could have a manufacturing flaw that you didn’t know about.
For example, if you don’t put the sole unit together correctly, it will make a suction noise if it gets wet.
Besides that, the loose heel can stick and slide as you walk. Many people might not think to look at the structure of the sandal because it doesn’t seem like the source of the suction noise.
Check your sandals for signs of wear or damage. If they’re new and you believe they’re broken, talk to the manufacturing company before you try to fix the suction noise.